41
OPTIONAL ACCESSORIES
Cleaning Unsealed Hard Floors
NOTICE Property Damage Risk. Use small amount of liquid
when cleaning unsealed floors. Always refer to manufacturer’s
recommended cleaning instructions. Failure to follow these
warnings could result in property damage to the floor.
1
Attach the empty Shampoo Tank to the Air Exhaust Port.
It is not necessary to attach the elbow hose.
2
Spray a fine mist of Ready to Use Kirby Hard Floor Cleaner
on a small area of the floor. Do not over-wet floor. Only a
small amount of solution is needed.
3
Put Tech Drive® power assist in neutral and turn
the cleaner on.
To Next Page
Loading...
Need help?
General
