Kirisun DP580-01 User Manual

DP580-01 Digital Two-way Radio
57
11.4 Radio Kill
This function allows the user to kill the target radio through air signaling. After the target radio is killed, the
key configuration data will be cleared and the radio is powered off automatically. You cannot operate the
radio after powering it on.
The killed radio can only be revived by the authorized dealer or supplier.
This feature is used to prevent the lost radio from being used and the key configuration data from being
stolen.
Note:
 Once the radio is killed, the configuration data will be lost and the radio cannot go back to
normal after reboot, so please operate with due care!
 The killed radio can only be revived by authorized dealer or supplier.
1) Receiving Kill Signaling
After a target radio receives the kill signaling and is killed successfully, it responds with a message of
successful operation to the caller radio; otherwise response fails.
After a radio is killed, its configuration data is cleared and it is powered off automatically.

Kirisun DP580-01 Specifications

General

Brand	Kirisun
Model	DP580-01
Category	Two-Way Radio
Language	English