Empty the melt water container manually at regular intervals
Ä
“Melt water container” on page 16.
When the defrosting process is active, the “Defrosting” LED dis-
play lights up on the Display.
In addition to automatic defrosting, it is possible to start the
defrosting process manually.
Press button [Additional defrosting] for four seconds.
ð
The defrosting process begins.
The melt water container is in the interior on the bottom of the unit
(/5).
Melt water is collected there and does not evaporate automatically.
Check and empty the melt water container regularly.
1.5.4 Temperature display
The temperature is shown on the Display of the unit’s display and
control unit
Ä
Chapter 1.2 “Display and control elements”
on page 11.
The Display indicates the temperature of the chilled goods.
The temperature display does not indicate the cur-
rent air temperature of the interior.
The alarm function and the temperature warning limits are based
on the temperature of the chilled goods as shown on the Display.
1.5.5 Temperature memory
The temperature memory records the maximum and minimum tem-
perature values reached during operation.
The temperature memory begins recording when the target tem-
perature is reached or, at the latest, after two hours of operation.
The temperature memory is reset automatically when the unit is
restarted or reset.
Additional defrosting
Melt water container
Fig. 7: Melt water container
Fig. 8: Display
Product description
Unit functions > Temperature memory
27.05.2021Refrigerator/freezer LABEX® series16
To Next Page
Loading...
