CAUTION!
Danger of damage and injury due to blocked
interior ventilation!
Without adequate ventilation of the cooling
machine the air circulation inside the unit is no
longer ensured. This can lead to a temperature
drop inside the unit, which can damage the chilled
goods.
– Make sure that the ventilation in the upper area
is clear.
– Do not cover ventilation grille with chilled goods.
NOTICE!
When a power failure occurs, the cooling unit is
switched off, which can damage or destroy the
chilled goods.
– Make sure that the unit is protected from power
failures (for example by an uninterruptible power
supply).
– After a power failure, make sure that the cooling
unit is supplied with power again.
– If necessary move the chilled goods to another
location and inform the service department.
NOTICE!
Danger of damage due to blocked outside ven-
tilation!
Without adequate ventilation of the cooling
machine the unit can overheat and be damaged.
– Do not set up units in close proximity to each
other.
– Make sure that the ventilation (back and front)
on the unit is clear.
– Do not cover the cooling machine.
– Allow only qualified staff to install the unit.
3.5 Safety markings
The type plate is mounted in the interior of the unit.
Blocked interior ventilation
Missing power supply
Blocked outside ventilation
Type plate
Safety
Safety markings
27.05.2021Refrigerator/freezer LABEX® series26
To Next Page
Loading...
