11 Status displays and error messages
11.1 Status displays
Status displays provide information to the user (for example
regarding an ongoing defrosting process).
A status display is not accompanied by an acoustic signal (here-
after referred to as “buzzer”)
A status display does not require any immediate action by the user.
Tab. 10: Status displays
Display Buzzer Description Measure Unit key
–
LED display [Defrosting] lights
up:
n The defrosting process is
active.
– –
–
LED display [Alarm] lights up:
n One or more alarms have
been triggered (collective
alarm).
– –
–
Standby display:
n The unit is connected to the
power grid and the key switch
is set to position “0”.
n Turn key switch to position “1”
to switch on the unit.
3
11.2 Error messages
WARNING!
Danger due to incorrect repairs or changes!
Incorrect repairs or changes can cause serious
injury (e.g. electric shocks) and damage (e.g. fire,
damage to chilled goods).
– Have repairs performed by the service depart-
ment.
– Use KIRSCH replacement parts.
– Do not make independent additions or changes
to the unit.
– If in doubt, contact KIRSCH.
Do not make repairs yourself
Status displays and error messages
Error messages
27.05.2021 Refrigerator/freezer LABEX® series 59
To Next Page
Loading...
