7.4 Switching on the SuperFrost function
The lower temperature warning limit of the unit is set to the lowest
value
Ä
Chapter 6.2.2 “Temperature warning limits” on page 38.
1. Press button [SuperFrost].
ð
LED display lights up.
The SuperFrost function runs for 12
hours and ends automatically.
2. Press button [SuperFrost] again.
ð
The SuperFrost function is deactivated.
3. Adapt lower temperature warning limit to the target tempera-
ture
Ä
Chapter 6.2.2 “Temperature warning limits”
on page 38.
7.5 Setting up PC-KIT-NET (optional)
Tab. 7: Factory settings TCP/IP
IP address of unit 192.168.0.101
Subnet mask 255.255.255.0
IP address of standard gateway 192.168.0.200
If you want to commission more than one unit, the
following applies:
Always connect one unit after the other to the net-
work and complete the network connection on the
PC.
The IP address of the unit and the IP address of
the standard gateway must be configured in the
same address field:
IP address of unit (example) 180.160.15.1
IP address of standard gateway
(example)
180.160.15.2
Switching on SuperFrost
Manually ending SuperFrost
Operation
Setting up PC-KIT-NET (optional)
27.05.2021Refrigerator/freezer LABEX® series44
To Next Page
Loading...
