Klemsan Klecard - Control Panel

Operator button
LED indicator
The LED reflects conditions of the Klecard.
This button opens and closes the printer tray. With this button it is possible to make some other
choices.
When you need to stop the printing session, you can press the Operator button and the job is
deleted.
When you need to check the printhead status, by pressing the button you access to the TPH
integrity test.
Control panel
10
User Guide
Printer OFF
Printer Ready
Media is placed
on the plate
The LED
is illuminated
Printer ON
No plate on the tray
Printer
is operating
and prints
your job
Exemple
of error
status
Printer ON
Plate on the tray
but no media
placed