26
User Guide
Safety information
Safety precautions
This manual and the indications on the product allow proper and safe operation.
The indication marks below help protect you and other persons from injury, and equipment
from damage.
Warning! Prohibition! Mnadatory!
According to the international standards, pictograms are used to indicate situations that could
result in bodily injury to personnel operating or maintaining the equipment.
Do not disassemble or use tools on the printer. All service procedures should be
performed by an authorized technician, or sent back to Klemsan for repair.
Do not service the printer with the power cord plugged into the outlet.
Do not reach inside the printer unless absolutely necessary. There may be sharp
edges or some metal parts.
Do not place or store the printer where children may reach it. Severe injuries and
equipment damage may occur if the printer is turned over or falls down.
Allow sufficient free space in front of the printer for opening the tray.
Do not touch the printer tray while is moving.
Do not place your finger into the front opening between the tray and the
printing device.
Do not revome the take-up roller when the printer is ON. Do not move the take-up
roller protection when the printer is ON.
Maintain the Klecard only with power OFF.
To Next Page
Loading...