8
Minnesota | Poll Pad Guide
OPENING PROCEDURES | POLL PAD SETUP
❹ PLUG PRINTER INTO OUTLET
Plug your printer into a wall outlet.
NOTE: Make sure your check-in table
is close to the wall outlet or you have
an extension cord available.
REMINDER: If you are using a power strip,
be sure it is turned on.
TURN PRINTER ON
The ON/OFF switch is located on the left side
of the printer. If you do not see a green power
light on the front panel, check the power cord
connections and make sure the outlet has
power.
❻ STAND ARM
To attach the stand arm to the iPad shell,
pinch the buttons on the side of the arm
and place in circular opening. Release buttons
and rotate the arm until you hear a click.
To Next Page
Loading...
