9
Minnesota | Poll Pad Guide
❾ POWER ON POLL PAD
Press the power button on the top left edge
of the unit until you see the Apple icon, then
release. The iPad will power on, and the Poll Pad
application with launch automatically.
NOTE: Poll Pad will power on automatically
if connected to AC power.
❼ CONNECT ARM TO BASE
Take arm and place into Poll Pad Base. Once
attached rotate iPad making sure the camera
is on top, oriented in a landscape position.
❽ ATTACH PHOTO ID TRAY
Slide the ID tray to the iPad using the mounting
slide. Once attached, insert stylus
into the holding slot. Adjust the iPad to a
suitable angle.
OPENING PROCEDURES | POLL PAD SETUP
To Next Page
Loading...
