KÖCO KST 108 - 14 Accessories; Accessories for ESP 1 S and ESP 1 K Welding Guns

14 Accessories
14.1 Accessories for ESP 1 S and ESP 1 K welding guns
Designation / Application
Part No.
Illustration
10 mm Ø chuck for threaded studs,
D = 3 mm: 351-7003-000
smooth pins, tapped studs
D = 4 mm: 351-7004-000
(D = external diameter of the stud)
D = 5 mm: 351-7005-000
D = 6 mm: 351-7006-000
D = 7,1 mm: 351-7053-000
D = 8 mm: 351-7008-000
Ø 12/10 mm chuck for M 10 threaded
studs
D = 10 mm: 351-7010-000
chuck for 6.3 mm blade terminal
351-7050-000
chuck for insulating pins
D = 2 mm: 351-7002-000
(D = diameter of the insulating pin)
D = 3 mm: 351-7001-000
angle cantilever for welding at restricted
places, near to edges, shaft Ø 10 mm,
for 10 mm Ø chucks
351-0044-000
positioning tube (Ø = 30 mm)
370-0335-000
Supporting tube (D = 30 mm)
326-0034-000
spacer ring (height = 16 mm)
351-0051-000
Issue 4/2019 ver. 2.0 page 37 of 42
Köster & Co. GmbH • D-58256 Ennepetal • Spreeler Weg 32 • Tel. +49 2333 8306-0 • Fax +49 2333 8306-38
Internet: http://www.koeco.net • E-Mail: koeco@koeco.net