Information Messages
KODAK 2100 Intraoral X-Ray System User Guide (SM700)_Ed04 6–3
Information Messages
An information “I” error code with a message appears on the display.
The following table lists the information messages and the actions to take.
Table 1 Information Messages
Information
Code
Possible Cause Action
I 01
Cooling cycle: this message can appear during
intensive use period.
Do not switch OFF the equipment.
The information message disappears
as soon as the system reaches a
satisfactory temperature.
IMPORTANT
If you switch OFF the system, the microprocessor does not calculate the
cooling time.
For safety reasons, it considers that the system has not gone through the
cooling cycle.
I 02 Request for X-ray tube seasoning. See the User Mode section.
To Next Page
Loading...
