Kodak 9000 - Control Panel Overview

Control Panel Overview
2–4 KODAK 9000 3D D IGITAL IMAGING UNIT OVERVIEW
Control Panel Overview
The control panel is an alphanumeric, digital soft touch console. It allows the operator to
control certain Unit functions. It also displays the operating parameters and error messages.
Figure 2–4 Unit Control Panel
1 Height Adjustment button: Adjusts the height of the unit to the height of the
patient.
2 3D Head Adjustment button: Adjusts the patient head to the x-ray beams.
3 3D Adjustment button: Adjusts the Unit arm movements to correctly position
the patient for 3D acquisition.
4 Laser Beam button: Activates the beams to correctly position the patient.
5 3D Position Verification button: Verifies the correct 3D positioning.
6 Reset button: Resets the Unit arm to the initial position to enable the patient to
enter and exit the Unit.
7 3D Memorization button: Memorizes the 3D current positioning parameter
settings that override the default parameters.
8 Display Screen: Displays the current acquisition parameters and the error
messages.
9 Ready Indicator LED: Green indicates the Unit is ready for acquisition.
10 X-Ray Emission LED: Yellow indicates x-rays are being emitted.
11 System Status LED: Red indicates error alerts.
mem
kV
mA S
76
1
23
5410911
8