KODAK 9000 3D Extraoral Imaging System_User Guide (SM710)_Ed 01 4–1
Chapter 4
GETTING STARTED
Starting the Imaging Software
Before starting your imaging software, check that:
• All the connections between the Unit and the PC are properly connected.
• The PC is turned ON.
To start your imaging software, follow these steps:
1. On your desktop, double-click
OR
From your PC, click Start > All Programs > Kodak > Kodak Dental Software.
Blank Patient Window is displayed.
2. Create or open an existing patient record.
Creating a Patient Record
To create a patient record, follow these steps:
1. In the Patient Window, from the toolbar, click
OR
From the menu bar, select Patient > New.
To Next Page
Loading...