General Software Overview
3–2 IMAGING SOFTWARE OVERVIEW
General Software Overview
The Kodak 9000 3D extraoral imaging system operates with the following software:
• Kodak dental imaging software
• Acquisition interface module
Kodak Dental Imaging Software
The Kodak dental imaging software is a user-friendly working interface that was designed and
developed specifically for radiological diagnosis. It is the common imaging platform for all
our digital systems for dentistry.
The Kodak dental imaging software has the following features:
• Patient record management via Patient Window features
• Extraoral and intraoral image management via Imaging Window features
• 3D image management via 3D Imaging Window features
Acquisition Interface Module
The Acquisition interface module is a user-friendly working interface that was designed and
developed specifically for Kodak 9000 3D extraoral imaging system.
The Acquisition interface module has the following features:
• Panoramic acquisition interface via Panoramic Acquisition Window
• 3D acquisition interface via 3D Acquisition Window
Backup Media Removable/portable, external hard
disk drive
Removable/portable, external hard
disk drive.
We strongly recommend a daily
backup of x-ray images and
patient records.
* NOTE: The indicated operating systems considerably increase the 3D volume image reconstruction time. The normal
duration of a few minutes is increased by more than an hour.
Table 3–1 Minimum PC System Requirements
Item
Minimum Workstation Image
Viewing Requirements
Minimum Workstation
Acquisition Requirements
Comments
NOTE
If you access the Imaging Window directly from your own patient
management software, you will not see the Patient Window.
To Next Page
Loading...