Acquiring a 3D Image
5–8 ACQUIRING IMAGES
3. Ask the patient to enter the Unit. On the Control Panel, press and hold to adjust the
Unit to the patient height.
4. Ask the patient to do the following:
• Stand up straight or sit on a stool.
• Grip the lower handle on each side.
• Position the feet slightly forward.
• Relax the shoulders for full motion of the Unit rotating Arm.
:
5. Position the patient head in the 3D head support.
• Ask the patient to open the mouth.
• Ask the patient to bite gently and naturally into the bite block without joining the
incisors.
• Center the upper incisors with the bite block.
NOTE
If the patient is too tall, ask the patient to sit on a stool.
To Next Page
Loading...