36
Wi-Fi Mode
Enable image transmission and remote control by connecting smart device with Wi-Fi.
Matters needing attention before use:
Your smart device operating system version needs to be iOS 8 or higher, or Android
4.2 or higher. If not, please upgrade your smart device before using the App.
Please do not use in places having high intensity magnetic ield, electrostatic and
electric wave interference (for example near a microwave oven), which may cause
failure in receiving signals.
To maintain a connection, please keep the camera within 10 meters (32.8 feet) without
signal shielding interference.
Please do not use Wi-Fi connection functionality on a plane.
The camera and the smart device can only be connected one to one.
Downloading the App package:
Download a dedicated installation package from the application store (App name:
PIXPRO Remote Viewer ) and then install it.
PIXPRO Remote Viewer”
in Google play, and install it following the instructions on the
interface.
: Search and download the App “PIXPRO Remote Viewer” in App
store, and install it following the instructions on the interface.
To Next Page
Loading...
Need help?
General
