January 17, 2007 8F2927 2-1
2
Using and Maintaining the
Imager
Operator Control of the Imager
During normal operation, the 6800 Laser Imager receives and automatically
prints images sent by modalities over a network. Very little operator control is
required. The main responsibilities of the operator are:
• turning Imager power ON and OFF.
• loading film cartridges.
• taking recommended actions when preventive maintenance (PM) is
indicated on the touch screen.
• monitoring and controlling some Imager functions using the touch
screen.
Turning Imager Power ON and OFF
There is a power switch and a power button on the 6800 Laser Imager. The
power switch should only be used the first time the Imager is powered ON or
when an immediate shutdown is required. For normal operations, use the
power button.
Power button
Power switch
Local panel
To Next Page
Loading...
