Overview
January 17, 2007 8F2927 1-3
How the Laser Imager Works
When the Laser Imager receives a print request, it determines the requested
film size anf type then selects the appropriate film cartridge.
Each time the Imager receives a print request, the following print sequence
occurs.
Print Sequence
1. Suction cups in the pickup area lift a single sheet of film out of the supply
cartridge and feed the film into the transport rollers.
2. The transport rollers move the film down into the registration transport
area, where film registration takes place.
1
2
3
4
5
6
To Next Page
Loading...
