Specifications
January 17, 2007 8F927 6-3
Floor Levelness The floor must be level within 1°.
Environmental Effects
• Heat Dissipation: total heat dissipation for the Imager is 4,800 BTU/hour
• Acoustical Noise:
– Less than or equal to 65 dB-A at 1 m during operation
– Less than or equal to 50 dB-A at 1 m during idle or standby mode
Laser Specifications
Power Requirements
Four power cord sets are provided with this equipment:
• power cord with plug for use in North America
• power cord with plug for use in China
• power cord with plug for use in the United Kingdom
• power cord with plug for use in Europe
All other countries must use an Agency-approved power cord with plug type
suitable for the country of use, or contact an authorized Kodak dealer.
One of the following single-phase, 15 A power sources, with grounding, must
6 x 10
-5
50-200 Hz Vertical or horizontal
5 x 10
-6
200-650 Hz Vertical or horizontal
1 x 10
-6
650-1000 Hz Vertical or horizontal
G
2
/Hz Freq. Range Direction
Item Specification
Wavelength 810 nm
Power 120 mW
Radiation class 3B
Type Diode
To Next Page
Loading...
