2-8 8F2927 January 17, 2007
Using and Maintaining the Imager
Loading and Removing Film Cartridges
The Film Drawer icon on the touch screen displays the number of sheets left
in a film cartridge. When a film cartridge is empty, the appropriate film
drawer icon flashes, and a large zero appears in the drawer icon.
CAUTION:
To avoid injury, do not leave the Laser Imager unattended
when the film drawers are open.
To load or unload a film cartridge:
1. On the touch screen, touch:
a. the Unlock icon
b. Unlock Film Supply
c. OK
2. Pull the drawer out to its furthest extension.
3. To remove a film cartridge, hold the edges of the cartridge and lift the
cartridge out of the drawer.
4. To load a new or different cartridge, insert the cartridge into the film
drawer with the DryView label up and the perforations to the left.
5. Close the drawer.
H210_0518BC
To Next Page
Loading...
