Kodak EasyShare 5500 - Page 122

Chapter 7
Standard
Provides the fastest possible fax transmission with the lowest quality. This is the default
setting.
Fine
Provides high-quality text suitable for faxing most documents.
Photo
Provides the best quality fax when sending photographs. If you choose Photo, be aware that
the faxing process takes longer to complete.
1
Press Fax. The Fax menu is displayed with Resolution selected.
2 Press _ or ` to change the resolution.
3 Press OK to set and continue setting options, or Start to fax.
Set Color
You can send faxes in color (default) or black-and-white.
1 Press Fax to display the Fax menu.
2 Press b until Color is selected.
3 Press _ or ` to change the fax color.
4 Press OK to set and continue setting options, or Start to fax.
Set Brightness
You can make faxes lighter of darker with the brightness command on the Fax menu. The default is 0, with
-3 the darkest and +3 the lightest.
1 Press Fax to display the Fax menu.
2 Press b until Brightness is selected.
3 Press _ or ` to change the fax brightness level.
4 Press OK to set and continue setting options, or Start to fax.
Save Settings
When you change fax settings from the control panel, the settings apply only to the current fax job. To
apply fax settings to all future fax jobs, you can save your changes.
1 Press Fax to display the Fax menu.
2 Press b until Save Settings is selected.
3 Press _ or ` to set Save Settings to Yes.
4 Press OK to set and continue setting options, or Start to fax.
118 Kodak EasyShare 5500 AiO