How to fix a Kodak Digital Camera that does not turn on?
If your Kodak Digital Camera does not turn on, first, remove and reinstall the batteries. If that doesn't work, replace or recharge the batteries. Also, ensure that the On/Off switch is completely in the On position by turning the camera off and then back on.
How do I fix 'Not enough space to copy files' on my Kodak EASYSHARE CX4230 Digital Camera?
If you see the message 'Not enough space to copy files' on your Kodak Digital Camera, it means there isn't enough space in the location you are copying to (internal memory or the card). Delete pictures from the location you are copying to, or insert a new card.
Why won't my Kodak EASYSHARE CX4230 Digital Camera turn off and the lens won't retract?
If your Kodak Digital Camera does not turn off and the lens does not retract, it's likely because alkaline batteries were installed. Do not use alkaline batteries. Turn off the power switch, remove the alkaline batteries, and replace them with an approved battery type. If the power switch is on when you replace the batteries, the camera may not turn back on; in that case, turn the power switch off, then on.
What to do if my Kodak EASYSHARE CX4230 freezes when inserting or removing a card?
If your Kodak Digital Camera freezes up when a card is inserted or removed, turn the camera off, then back on. Always ensure the camera is turned off before inserting or removing a card.
Why are my Kodak Digital Camera pictures too light?
If your Kodak Digital Camera's picture is too light, change to Auto flash if the flash is not needed. If the subject was too close when the flash was used, move so there is at least 1.6 ft (0.5 m) between the camera and the subject. If the lighting condition is too bright, decrease exposure compensation.
What does it mean when the ready light glows steady red on my Kodak Digital Camera?
If the ready light on your Kodak Digital Camera glows steady red, it could mean the camera’s internal memory or card is full; transfer pictures to your computer, delete pictures from the camera, switch storage locations, or insert a card with available memory. It could also mean the camera processing memory is full; wait until the light turns green. Another possibility is that your card is read-only; change your storage location to internal memory, or use a different card.
Why doesn't my Kodak EASYSHARE CX4230 Digital Camera recognize my MMC/SD card?
If your Kodak Digital Camera is not recognizing your MMC/SD card, make sure you are using a certified MMC/SD card. If the card is corrupt, reformat it, but be aware that formatting will erase all pictures from the card. Also, check that the card is fully inserted into the card slot.
Why is my Kodak Digital Camera picture too dark?
If your Kodak Digital Camera's picture is too dark, turn on the flash. If the subject is too far away, move closer, ensuring there's no more than 12.8 ft (3.9 m) in Wide angle or 7.5 ft (2.3 m) in Telephoto between the camera and the subject. If the subject is backlit, use Fill flash or change your position. If the lighting condition is too dark, increase exposure compensation.
What to do if the shutter button does not work on my Kodak EASYSHARE CX4230?
If the shutter button on your Kodak Digital Camera isn't working, first ensure that the camera is turned on. If the ready light is blinking, the camera is processing a picture; wait until it stops before taking another picture. If the card or internal memory is full, transfer pictures to your computer, delete pictures from the camera, switch storage locations, or insert a card with available memory.
What does it mean when my Kodak EASYSHARE CX4230 Digital Camera says 'Memory card requires formatting'?
If your Kodak Digital Camera displays the message 'Memory card requires formatting', it means the card is corrupted or formatted for another digital camera. Insert a new card or format the card.
Identifies the front components of the KODAK EASYSHARE CX4230 camera.
Details the components located on the bottom of the KODAK EASYSHARE CX4230 camera.
Illustrates and labels the components on the back of the KODAK EASYSHARE CX4230 camera.
Instructions for installing the KODAK EASYSHARE Software before connecting the camera.
Step-by-step guide for correctly inserting camera batteries.
Step-by-step guide on how to capture a photograph with the camera.
Guidance on selecting and using different flash modes.
Instructions on how to access the mode for viewing stored images.
How to remove unwanted images from the camera's memory.
Marking photos for print jobs.
Steps to enter the camera's setup menu for customization.
Erasing and preparing storage media for camera use.
Step-by-step guide for installing the KODAK EASYSHARE Software.
How to connect the camera to a computer using a USB cable.
Steps to charge the camera's battery using the dock.
Solutions for common camera problems.
Explains and provides solutions for on-screen camera messages.
Provides useful website addresses for support.
Detailed technical specifications for the camera.
General| Camera Type | Compact |
|---|---|
| Image Sensor | CCD |
| Effective Pixels | 2.0 MP |
| Optical Zoom | 3x |
| Storage Media | SD/MMC card |
| Battery Type | 2 x AA batteries |
| Image Resolution | 1600 x 1200 |
| Display Size | 1.6 inches |
To Next Page