52 www.kodak.com/go/support
Troubleshooting
Print button/light
Light status Cause Action/solution
Light glows green Printer dock ready for printing. None required.
Light blinks green Printer dock printing.
Light is off No pictures in the camera or on
the memory card.
None required.
To enable Print:
1 Take pictures.
2 Dock the camera.
Camera not properly seated on
the connector.
Reseat the camera on the printer
dock (page 7).
Camera transferring pictures to
the computer; established active
connection to the computer.
None required.
PictBridge compatible device
connected.
None required.
The Print button is disabled; print
command is controlled from the
PictBridge compatible device. To
print from another source, unplug
the PictBridge compatible device.
Transfer button/light
Light status Cause Action/solution
Light glows green Printer dock ready for
transferring pictures.
None required.
To Next Page
Loading...
Need help?
General