Kodak PIXPRO AZ401

30
31
30
31
Scene Mode
During shooting, the lash, self-
timer, macro modes and exposure
compensation are not available.
Focus adjustment is also not
available at this time.
In the process of shooting in the
panoramic mode, when the LCD
shows “Improper alignment. Please
try again.”, it means that in the
process of camera moving, the
moving angle is off the green line,
shooting can't be done. You will have
to try again.
In order to guarantee the shooting
effect in the panoramic mode,
please keep moving horizontally and
reduce the shake in the process of
camera movement.
In panorama mode, up to 4 photos
can be captured when the image
size is set at 2MP.
You can select an appropriate mode from
the 12 scene modes according to the
type of environment you are shooting.
The camera then conigures the most
appropriate settings automatically.
1. Turn the mode dial to the scene mode,
then the LCD will display as below:
Night Portrait
2. Press the arrow buttons to select a
scene, and press the button to
conirm.
3. If any need of changing the scene,
please press the button and then
the button and inally the arrow
buttons to reselect the scene.