Custom Settings
The user can store the frequently used
shooting modes and parameters and switch
to this mode for quick adjustment.
Settings under mode (unset state or
state after reset):
1. Turn the mode dial to select the
mode, and enter the setup screen, as
shown in the igure below:
Select one capture mode to define CS .
Landscape
Save
Exit
2. As shown in the above igure, press
the left/right arrow buttons to select a
capture mode that you want to deine as
, and press the button to enter the
shooting screen.
3. As shown in the above igure, press
the button, and choose whether to
continue the mode setting or rotate
the mode dial to skip.
Or
Go to setting CS mode
Rotating the mode dial to skip .
Yes
For setting under other modes (use this
method to select a different custom
setting):
1. Select any mode to be stored.
2. Set your desired parameters in the
current mode.
3. Press the button, press the up/down
arrow buttons to select , and press
the button to enter the menu.
4. Press the up/down arrow buttons to
select , and press the button or
right arrow button to enter the menu.
To Next Page
Loading...
