82
Transferring iles to your computer
The computer will automatically detect the camera as a removable drive. Double-click the
My computer icon on the desktop to locate the removable drive and to copy folders and
iles in the drive to a directory on your PC as you would copy any typical folder or ile.
Follow the steps below to connect the camera to a computer.
1. Make sure the computer is turned on.
2. Connect one end of the micro USB cable to the USB/AV OUT port on your camera.
3. Connect the other end of the micro USB cable to an available USB port on your
computer.
4. After the transmission is complete, disconnect the micro USB cable according to the
instructions specifying how to safely remove USB devices.
To Next Page
Loading...
