Kodak PIXPRO AZ401

84
85
If the Eye-Fi card is not available
in the camera, this feature is not
displayed.
This camera supports the wireless
connection for Eye-Fi card, Enable Eye-Fi
connection by following below steps.
1. Press the button, press the up/down
arrow buttons to select and press
the button to enter the menu.
2. Press the up/down arrow button to
select and press the button or
right arrow button to enter the menu.
3. Press the up/down arrow buttons to
select 「Eye-Fi」and press the button
or right arrow button to enter the menu.
4. Press the up/down arrow buttons to
select「On」or「Off」and press the
button to conirm.
Set Eye-Fi Card Connection Mode