Kodak PIXPRO AZ401

76
Power Saver
This setting allows you to save power and
get the maximum possible running time
for your camera's batteries. Follow the
steps below to turn the LCD and camera
off automatically after a consecutive
period of inactivity.
1. Select「Power Saver」in the basic
settings menu. Press the button or
right arrow button to enter the menu.
2. Press the up/down arrow buttons to
select an option.
3. Press the button to conirm.
Power
Saver
LCD power off time
Turn off
time
Auto 3 min 5 min
Normal
1 min 3 min
Best 30 s
1 min
Language
Refer to the “Resetting your language”
section on page 18.
World Time
The zone setting is a useful function for
your overseas trips. This feature enables
you to display the local time on the LCD
while you are abroad.
1. Select「World Time」in the basic
settings menu. The world time screen
appears.
2. Press the up/down arrow buttons to
select the departure place ( ) and
destination ( ) ields.
3. Press the left/right arrow buttons to
select a city located in the same time
zone as that of the ield. Press the
button to conirm settings.