Kodak PIXPRO AZ401

86
87
Connecting to a PictBridge Compatible Printer
PictBridge technology allows printing of
the photos saved in the memory card by
the printer.
To ind out if a printer is PictBridge
compatible, simply look for the PictBridge
logo on the packaging or check the
owner's manual for speciications. With
the PictBridge function on your camera,
you can print the captured photos directly
to a PictBridge compatible printer using
the micro USB cable, without the need for
a PC.
Setting the USB Mode
The camera’s USB port can be set to
connect with either a PC or a Printer,
the following steps will ensure that the
camera is correctly conigured to connect
with a Printer.
1. Press the button, press the up/down
arrow buttons to select and press
the button to enter the menu.
2. Press the up/down arrow buttons to
select and press the button or
right arrow button to enter the menu.
3. Press the up/down arrow buttons to
select「USB」and press the button
or right arrow button to enter the
menu.
4. Press the up/down arrow buttons to
select「Printer」and press the
button to conirm.
After the camera is reset, it will
switch to PC mode automatically
from USB mode.
See “Using the PictBridge Menu“
section on page 88.