Kodak PIXPRO AZ401

91
Print DPOF Images
To use DPOF printing, you must select
your photos for printing using the DPOF
settings beforehand. See “DPOF” section
on page 74.
1. In the PictBridge menu, select「Print
DPOF Images」and the screen as
shown below appears.
2. Select「Yes」and press the button
to conirm; select「Cancel」to cancel
printing.
Exit
Select「Exit」to exit the PictBridge menu.
At this time, the message「Remove USB
Cable!」appears on the screen.
Disconnect the micro USB cable from the
camera and printer.