97
Message Description Solution
Remove USB Cable!
Indicates that you can
disconnect the USB cable.
The message disappears after
you disconnect the USB cable.
Connection Failed!
Failure to connect to your
PC, printer, TV (with HDMI).
Remove USB cable and retry
connection.
Write Protect ! The SD card is locked.
Remove SD card and switch
the lever on the side of card
to UNLOCK. The message will
disappear after 2 seconds.
Card Full !
Indicates that the SD card
is full.
Replace SD card with another
that has available memory. The
message will disappear after 2
seconds.
Memory Full !
Indicates that the camera
memory is full.
It disappears after 2 seconds.
Card Error !
During power-on, the SD
card cannot be recognized
or a read/write error
occurs.
Format the SD card. WARNING:
Formatting the SD card will
erase all data on the card.
Copy the data from the SD
card to another storage, such
as a computer. Otherwise,
all data will be erased after
the format. The message will
disappear after 2 seconds.
To Next Page
Loading...
