- 12 -
1
Indications regarding the points on the engine where the safety pictograms are placed
- Ensure the good condition of safety signs.
- If the safety signs are damaged and / or illegible, you must replace them with other originals and place them in the positions
shown below.
- For cleaning use a cloth, water and soap.
- Read the Operation and Workshop manual before
performing any operation on the engine
- High temperature components
- Danger of scalding
- Presence of rotating parts
- Danger of entangling and cutting
- Presence of explosive fuel
- Danger of re or explosion
- Presence of steam and pressurized coolant
- Danger of scalding
- Use protective gloves before carrying out the
operation
- Use protective glasses before carrying out the
operation
- Use sound absorbing protections before carrying out
the operation
- Electric shock
- Danger of severe scalding or death
- Fluids under high pressure
- Danger of uids penetration
- Lethal exhaust gas
- Danger of poisoning or death
Explanation of the safety pictograms that can be found on the engine or in the Workshop manual
General remarks and safety information
To Next Page
Loading...
Need help?
General
