Kohler KDI 1903 TCR

INFORMATION ABOUT USE
4
29
EN
4.5 Oil filling
Important
•
For safety precautions see Par. 2.4 .
•
Before proceeding with operation, read Par. 3.2.2
.
•
Do not use the engine with the oil level below the minimum.
1.
Loosen the oil filler cap A or the oil filler
cap C if the cap A is not accessible.
2.
Add the oil of type recommended (
Tab. 2.1 and Tab. 2.2
).
Fig 4.1
1.
Before checking oil engine needs to be
level.
2.
Remove the oil dipstick B and check
that the level is up to but does not
exceed the MAX .
3.
If level is not at the MAX . level, add
additional oil.
4.
Re-tighten the cap A or C .
Fig 4.2
NOTE : Click on the right to play the
procedure.
https://www.youtube.com/embed/cVpoy_m253A?rel=0