Kohler KDI 1903 TCR - ATS Regeneration Strategy (only for Stage V configurations)

4
INFORMATION ABOUT USE
EN 32
4.7 ATS regeneration strategy (only for Stage V configurations)
Only for Stage V configurations (see Par. ATS)
You can intervene on the machine control panel for the DPF regeneration operations "only if requested
by means of specific warning lights or messages on the control panel".
Tab. 4.11 describes the level of particulate accumulation, the relationship with the warning lights that will
light up on the panel, the performance limitations of the engine and the operator’s options intervention.
Forced regeneration must be executed in accordance with the machine instructions.
4.11
SOOT
LEVEL
WARNING
LAMPS *1
ENGINE DE-
RATE
OPERATOR POSSIBLE
ACTIONS
OPERATING
CONDITIONS
Level 0
•
No condition
Level 1
Level 2
Level 3
Fixed
Forced Regeneration is
Necessary.
•
Coolant
temperature at
60 °C
•
Do not switch
the engine off
•
Stationary
vehicle
•
No load
applied to the
engine *2
Level 4
Flashing
Engine de-
rate.
Forced Regeneration is
Necessary.
•
Coolant
temperature at
60 °C
•
Do not switch
the engine off
•
Stationary
vehicle
•
No load
applied to the
engine *2
Level 5
Flashing
Strong Engine
de-rate.
Contact an authorized
KOHLER workshop.
Service Regeneration
Required
REGENERATION via
Kohler software
*1:
The warning lights be different – consult the machine manual.
*2:
Unless stated otherwise in the machine manual.