1
GENERAL INFORMATION
EN 4
1 GENERAL INFORMATION
1.1 Manual's Purpose
This manual contains the instructions needed to carry out proper use and maintenance of the
engine, therefore it must always be available, for future reference when required.
•
This manual is an integral part of the engine, in the event of transfer or sale, it must be attached
to it.
•
Safety pictograms can be found on the engine and it is the operator's responsibility to keep them
in a perfectly visible place and replace them when they are no longer legible.
•
Information, description and pictures in this manual reflect the state of the art at the time of the
marketing of engine.
•
However, development on the engines is continuous. Therefore, the information within this
manual is subject to change without notice and without obligation.
•
KOHLER reserves the right to make, at any time, changes in the engines for technical or
commercial reasons.
•
These changes do not require KOHLER to intervene on the marketed production up to that time
and not to consider this manual as inappropriate.
•
Any additional section that KOHLER will deem necessary to supply some time after the main text
shall be kept together with the manual and considered as an integral part of it.
•
The information contained within this manual is the sole property of KOHLER . As such, no
reproduction or replication in whole or part is allowed without the express written permission of
KOHLER .
1.2 Glossary and Definitions
The paragraphs, tables and figure are divided into chapter with their progressive numbers.
Es:
Par. 2.3
- chapter 2 paragraph 3.
Tab. 3.4
- chapter 3 paragraph 4.
Fig. 5.5
- chapter 5 paragraph 5.
The references of the objects described in the text and in figure and number are indicated by letters,
which are always and only related to the paragraph you are reading unless there are specific references
to other figures or paragraphs.
NOTE:
All data, measurements and relevant symbols are shown in the glossary section.
To Next Page
Loading...
Need help?
General