INFORMATION ABOUT MAINTENANCE
5
37
EN
5.3 Oil level check
•
Before proceeding with operation, read Par. 3.2.2
.
•
Do not use the engine with the oil level below the
minimum.
•
Change the oil and oil filter if the level exceeds the
MAX.
•
Do not use the engine with the level of oil over MAX.
1.
Loosen the oil filler cap A .
Remove the oil dipstick B and check that the level is up
to MAX .
2.
Pour in recommended oil until reaching the MAX level
mark.
3.
Reinstall the oil dipstick B completely..
4.
Re-tighten the cap A and/or C (Fig. 5.2) .
Fig. 5.1
Fig. 5.2
5.4 Oil dipstick on cylinder head
Important
• Before proceeding with operation, read Par. 3.2.2 .
Fig 5.3 - Fig. 5.4
To Next Page
Loading...
