5
INFORMATION ABOUT MAINTENANCE
EN 38
5.5 Air filter check
•
Before proceeding with operation, read Par. 3.2.2
.
•
When the cartridge G is dirty, do not clean it but
replace cartridges B and G.
NOTE:
Components not necessarily supplied by
KOHLER
.
1.
Release the two clasps F of the cover A .
2.
Remove the cartridges B and G .
3.
Clean the inside components A and D with a damp
cloth.
4.
Do not use compressed air , repeatedly tap the front
side E on a flat surface.
5.
Reinstall:
- cartridges G and B.
- the cover A checking the right tightness of clasps F .
Fig 5.5
5.6 Check of the radiator heat - exchanger surface
•
For safety precautions see Chap. 3 .
NOTE:
Component not necessarily supplied by
KOHLER
.
Important
•
Before proceeding with operation, read Par. 3.2.2
.
•
Wear safety goggles when using compressed air.
•
The radiator heat-exchange surface must be cleaned
on both.
1.
Check the radiator heat-exchange surface D .
2.
Clean the surface with a brush soaked in special
detergent if it is clogged.
Fig 5.6