5
INFORMATION ABOUT MAINTENANCE
EN 40
5.8 Check coolant level
•
Before proceeding with operation, read Par. 3.2.2
.
Danger
•
For safety precautions see Chap. 3 .
NOTE
: Before proceeding with any operation on the engine,
stop it and allow it to cool.
Warning
•
Presence of steam pressurized coolant danger of
burn.
NOTE
: Component not necessarily supplied by
KOHLER
.
1.
Start the engine without the radiator cap A .
2.
Top liquid up until the pipes inside the radiator are
covered by about 5 mm.
3.
Top up if necessary.
4.
Do not overfill the radiator, but leave room for the
coolant to expand.
5.
Reinstall radiator cap A
6.
For engines equipped with expansion tank (B) ,
check that the fluid is until reaching the max level
mark
NOTE : For coolant filling see Par. 4.6 .
Warning
•
Before starting make sure that the radiator cap and
cap, if present, are installed correctly to avoid
spillage of liquid or vapour at high temperatures.
Fig 5.9
Fig 5.10
To Next Page
Loading...
