INFORMATION ABOUT MAINTENANCE
5
39
EN
5.7 Rubber hoses check
•
For safety precautions see Chap. 3 .
The check is carried out by exerting a slight deflection or
bending along the pipe and near the hose clamps.
Components must be replaced if they have clear signs of
cracks, tears, cuts, leaks and do not retain a certain degree of
elasticity.
Important
•
Before proceeding with operation, read Par. 3.2.2
.
•
If hoses are damaged contact an authorized KOHLER
workshop.
Fig 5.7
Check that the:
- Fuel system hoses A are intact.
- Cooling circuit hoses B .
- Vent system pipes C .
- Air system ducts D .
- Oil return circuit hose E .
Fig 5.8
To Next Page
Loading...
Need help?
General