TECHNICAL INFORMATION
2
11
EN
Internal Communication: For internal & partner use only.
2.4.1 SAE oil classification
• In the SAE classification, oils are identified according to viscosity without considering any other
qualitative characteristic.
• The code is composed of two numbers, which indicate, and must correspond to, the ambient
temperature in which the engine operates, the first number refers to the viscosity when cold, for use
during winter ("W"), while the second number is for viscosity at high temperatures.
2.2
VISCOSITY
SAE
10w-40 (-25°C ÷ +50°C)
5w-30 (-30°C ÷ +40°C)
WITH SPECIFICATIONS
API
ACEA
E5
• Low S.A.P.S. oils, sulfate ashes <1% may not be used with fuels with a sulfur content >50ppm.
• Filtration of oils is critical to proper operation and lubrication; always change filters regularly as
specified in this manual.
To Next Page
Loading...
Need help?
General