Kohler KDI 2504TM User Manual

INFORMATION ABOUT USE
4
25
EN
Internal Communication: For internal & partner use only.
4.3.2 After starting
Warning
•
Make sure that all the warning lights on the control panel are off when the engine is running.
•
Run at minimum speed for a few minutes according to table (except constant speed engine).
AMBIENT TEMPERATURE
TIME
≤-20°C
2 minutes
from -20°C a -10°C
1 minutes
from -10°C a -5°C
30 seconds
from -5°C a 5°C
20 seconds
≥ 5°C
15 seconds
4.3.3 Turning off
1.
Do not turn off the engine when it is running at the maximum rotation speed (except constant
speed engine).
2.
Before turning it off, keep it idle at minimum speed for about 1 minute.
3.
Turn the key to OFF position.
4.4 Refuelling
Important
• Before proceeding with operation, read Par. 3.2.2.
Danger
• Fill the engine off.
• The only approved fuels are those listed in Tab. 2.3.
• In those countries where fuel has a high sulphur content, its is advisable to lubricate the engine with
a high alkaline oil or alternatively to replace the lubricating oil recommended by KOHLER more
frequently.
• To avoid explosions or fire outbreaks, do not smoke or use open flames during the operations.
• Fuel vapours are highly toxic.Only carry out the operations outdoors or in a well ventilated place.
• Keep your face well away from the fuel fill to prevent harmful vapours from being inhaled.
• Dispose of fuel in the correct way and do not litter as it is highly polluting.
• When refuelling, it is advisable to use a funnel to prevent fuel from spilling out.The fuel should also
be filtered to prevent dust or dirt from entering the tank.
Do not overfill the fuel tank. Leave room for the fuel to expand.
NOTE: At the first fuelling or if the tank was empty filling the fuel system (Par. 6.3 point 8).

Kohler KDI 2504TM Specifications

General

Brand	Kohler
Model	KDI 2504TM
Category	Engine
Language	English