Y Adapter (Splitter) for S300/S600/S700
The signals for the serial link to the PC and the CAN interface are routed via the same con-
nector on the servo amplifier (X6). Our Y adapters can be used for simultaneous access to
both interfaces. In this case, the interface signals are routed via separate connectors.
Article Order Code
Y-Programming-Adapter 1 Axis DE-108211
Y-Adapter -SR6Y- 4 Axes (Multilink Cable) DE-90060
Y-Adapter -SR6Y6- 6 Axes (Multilink Cable) DE-92042
The multi-axis Y adapters support the simultaneous setup (multi-link) of a number of
S300/S600/S700 in a single setup session.
Y-adapter for 1 Axis Y-adapter for 4 axes Y-adapter for 6 axes
Accessories Europe | 11 Cables
Kollmorgen | December 2014 47
To Next Page
Loading...
