13-35
Setting the Confidential Boxes
The FK-102 Type-A provides a confidential box feature, which utilizes the F-code. Before the
confidential box can be used, you must define it with a box number, an access password, a name
and an access protect number.
The procedures for registering, changing and deleting the confidential box are described below.
• Confidential box No.:................... 20 boxes are available for the confidential box and bulle-
tin boards. Designate a box number 001-020.
• Notify the details of setting to the fax side to which
confidential transmission is to be made.
• Confidential password:................ Password to receive the confidential document. Desig-
nate a 4-digit number. This is needed if password for the
confidential box is marked.
• Notify the details of setting to the fax side to which
confidential transmission is to be made.
• Name: ......................................... Name the confidential box with a string of up to 10 bytes.
• Access protect No.: ..................... This is also a password required when you attempt to
print out or delete the document held in the confidential
box. Designate a 4-digit number.
• Check Rx P.W.:........................... Set to check the Confidential password sent from the
remote station at the time of receiving documentation to
the Confidential box.
•
The information defined should be given to the station (FAX) that will initiate confidential
transmission.
• You can confirm the access protect number in a list. For detail, see "Confirming confiden-
tial access protect numbers" (p. 14-55).
• For operations of confidential communication, see "Confidential Communication" (p. 10-
32).
DETAILS
Setting Abbreviated
Di a l N umber s
Setting
Program Dial
Setting Dial
Groups
Setting Relayed
Transmission
Setting the
Confidential Boxes
Setting the
Bulletin Board
Registering Internet
Fax Mail Address
R egis ter i ng t h e
Internet Fax Subject
Re giste ring th e Int er net
Fax Mai l Mess ag e
FAX
To Next Page
