14-30
Report Output Set
You may select the Report output set to be On or Off. This settings prints the reports of communi-
cation management, communication result and reservation, and the input/output trays for the
reports. If ON is selected, the manner of printing may also be selected.
• Communication Journal: OFF* / Daily / 100 com. / 100 & Daily
When Daily is set, Communication Journal is printed our at
9 o'clock in every morning.
• Transmission report: Always / Only error * / OFF
• Sequential Tx report: ON* / OFF
• Tx reservation report: ON* / OFF
• Confidential Rx report: ON* / OFF
• Bulletin Tx report: ON* / OFF
• Relay Tx result report: ON* / OFF
• Relay Request Rx report: ON* / OFF
• Relay print ON / OFF*
• PC-Fax Tx Error Report: ON* / OFF (With optional print controller)
• Sync. Result Rpt output: All stn* / each stn
• Tx result report select: ON / OFF*
• Paper tray for reports: Tray1 / Tray2* / Tray3 / Tray 4 / LCT/ Bypass
• Exit tray for reports: Tray 1 / Tray 2 / Tray 3 / Tray 4*
* indicates factory default setting.
•
Select ON in "Tx result report select screen," the transmission report will be printed if YES
is selected. The report will not be printed if NO is selected.
• Tray used depends on trays installed.
DETAILS
To Next Page
