C353/C253/C203 2-53
Basic copy operations
2
2.10 Selecting the quality of the original
2.10.1 Loading originals with small print or photos (Original Type settings)
Select the setting for the text and image type of the original to better adjust the copy quality.
The following Original Type settings are available.
2
Note
As the factory default, "Text/Photo" is selected.
The following procedure describes how to select an Original Type setting.
Icon Description
Text
Select this setting when copying originals containing only text.
The edges of copied text are reproduced with sharpness, providing an
image that is easy to read.
Text/Photo Photo Paper
Select this setting when printing photos from originals containing both
text and images onto photographic paper.
A smooth copy image is produced.
Printed Photo
Select this setting when copying printed originals containing both text
and images, such as pamphlets or catalogs.
Photo Photo Paper
Select this setting when printing photos from originals onto photo-
graphic paper.
Select this setting to produce better reproductions of halftone original
images (photographs, etc.) that cannot be reproduced with the usual
settings.
A smooth copy image is produced.
Printed Photo
Select this setting when copying printed originals, such as pamphlets
or catalogs.
Select this setting to produce better reproductions of halftone original
images (photographs, etc.) that cannot be reproduced with the usual
settings.
Map
Select this setting when copying originals with a background color or
originals containing pencil markings or fine colored lines. A sharp copy
image is produced.
Dot Matrix Original
Select this setting when copying originals containing only text that ap-
pears faint (such as that written with a pencil).
The copied text is reproduced so that it is darker, making it easier to
read.
Copied Paper
Select this setting when copying images (originals) printed with this
machine.
To Next Page
Loading...
Need help?
General
