7
Application functions
7-64 C353/C253/C203
7.15 Copying booklets ("Booklet Original" function)
A booklet with its staples removed can be copied and bound with staples at the center to create copies of
the original booklet.
!
Detail
For details on stapling, refer to "Binding copies at the center ("Center Staple" and "Half-Fold"
setting/"Center Staple & Fold" setting)" on page 2-74.
With the "Booklet Original" function, copies are made of the entire page, including the center of the
original (area bound with staples).
For details on positioning the original, refer to "Feeding the original" on page 2-7.
0 This function can be used when optional finisher FS-609 is installed or optional finisher FS-519 is
installed with the saddle stitcher attached.
1 Position the original to be copied.
– Load a booklet with the staples removed.
– The number of sheets that can be stapled together is no more than 15 and differs depending on the
paper type. For details, refer to "Selecting a folding setting" on page 2-72.
– When using the original glass, position the pages in order, starting with the side that includes the
first page, then the side that includes the second page, then the side that includes the third page.
7
2
2
1
8
2
2
7
7
5
4
4
3
6
5
4
4
3
6
Staples
+
2
7
8
1
4
5
6
3
To Next Page
Loading...
Need help?
General
