2
Basic copy operations
2-8 C353/C253/C203
3 Adjust the lateral guides to the size of the original.
– For details on loading originals of mixed sizes, refer to
"Copying originals of mixed sizes ("Mixed Original"
setting)" on page 2-19.
– For details on specifying the original orientation, refer
to "Selecting the original orientation (Original
Direction settings)" on page 2-22.
– For details on specifying the binding margin position,
refer to "Selecting the position of the binding margin
(Binding Position settings)" on page 2-24.
2.3.2 Placing the original on the original glass
0 For details on the types of originals that can be placed on the original glass, refer to "Originals" on
page 6-20.
0 When placing the original on the original glass, be sure to lift open the ADF or the original cover at least
20°.
If the original is placed on the original glass without the ADF or the original cover being lifted at least
20°, the correct original size may not be detected.
0 Do not place objects weighing more than 2 kg on the original glass. In addition, do not press down
extremely hard on a book spread on the original glass, otherwise the original glass may be damaged.
0 For thick books or large objects, make the copy without closing the ADF or the original cover. When an
original is being scanned with the ADF or the original cover open, do not look directly at the light that
may shine through the original glass. Although the light that shines through the original glass is bright,
it is not a laser beam and, therefore, is not as dangerous.
1 Lift open the ADF or the original cover.
2 Place the original face down on the original glass.
– Load the original pages so that the top of the original is toward the back or the left side of the
machine.
3 Align the original with the mark in the back-left corner of the original scales.
– For details on selecting the original orientation, refer to "Selecting the original orientation (Original
Direction settings)" on page 2-22.
Lateral guides
When
loaded
in the v
orientation:
When
loaded
in the w
orientation:
20° 20°
To Next Page
Loading...
Need help?
General
