28
Setting
4-a-5. Press
ENTER
key.
After the setting is entered, the MENU -
MEAS - SYNC MODE screen appears
again on the LCD.
5. Press
ENTER
key.
When the synchronizing method is set, the
MENU - MEAS screen appears again on the
LCD.
By pressing
ESC
key, after the setting is
canceled the MENU - MEAS screen appears
again on the LCD.
The setting of the synchronizing method is
saved even after the power switch is turned off
(O).
4-a-4. Repeat the same procedures 4-a-
2. and -3. as necessary.
6. Press
ENTER
key.
The MENU screen appears again on the LCD.
7. Press
ESC
key.
The MEAS screen appears again on the LCD.
MEAS SNGL
UC00
SPD
N
r
m
Ob
s
2
˚
SYNC
I n t
ND
No n
BL
on
LEN
S t d
cd
m
2
Lv
x
y
T01
35. 93
0 . 3968
0 . 4060
To Next Page
Loading...
