9
Notes on Use
• Do not replace the internal backup battery
yourself. Contact the nearest authorized service
facility to replace the backup battery.
• If the instrument is subjected to strong static
electricity, the display may become blank. If this
occurs, wait for the power to be automatically
switched off, and then switch the power on
again.
• Do not perform any repairs on the unit yourself.
The unit must be opened by trained professions
only. Please contact our customer service
department in such cases.
• Do not use accessories other than those
specified by KONICA MINOLTA SENSING, INC.
• Installation category I: The specified battery
must be used.
• Pollution degree 2: Use it in areas where there is
no metal dust and no possibility of condensation.
• Do not use at altitudes of higher than 2000m.
Additional information on use:
• Make sure that the instrument, accessories and
used battery are either disposed of or recycled
correctly in accordance with local laws and
regulations.
To Next Page
Loading...
